HDCVT TECHNOLOGY HDV-E4100W, Руководство пользователя

Страница: 6 / 8

6.Pairing instruction
DC 5V
Plug the 5V/1A adapter to AC wall outlet for power
supply.
5
6 Antenna port Connect to WiFi antenna.
4/6
① Pairing methods
Establish Pairing: Power on the receiver and the transmitter
,
then press the
“PAIR” button simultaneously up to 3s and LED will flicker. When the LED on
the receiving end is from flicker to constant light (the LED on the transmitter will
be always flicker. When you let go your hand, the LED on the transmitter will be
constant light). At this moment, the receiver and the transmitter have paired
success.
Note : One-to-one and one-to-many use the same method.
Cancel Pairing: Short pressing “PAIR” button on the receiver (within one
second), the LED on the receiving end will flicker once and then stay on. At this
moment, the receiver and the transmitter have cancelled pair.
② Pairing conditions
One transmitter can connect simultaneously at most four receivers. However,
one receiver can only connect simultaneously one transmitter.
③ Pairing ways
When a room only has one transmitter and one receiver: If the receiver
has not paired, it can automate pair the transmitter.
When a room has one transmitter and many receivers: One transmitter
can pair simultaneously at most four receivers.
When a room has many transmitters and one receiver: If the receiver has
not paired, the receiver can pair randomly any transmitters; If the receiver need
pair designate transmitter, you have to pair manually.
When a room has many transmitters and many receivers: No pair receivers
that it can pair randomly any transmitters. If the receivers need pair designate
the transmitters, you have to pair manually the receivers and the transmitters.