background image

 

 2 

Thank you for purchasing this product 

For  optimum  performance  and  safety,  please  read  these  instructions  carefully  before  connecting,  operating  or 
adjusting this product. Please keep this manual for future reference.

 

Surge protection device recommended

 

This  product  contains  sensitive  electrical  components  that  may  be  damaged  by  electrical  spikes,  surges,  electric 
shook, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend 
the life of your equipment. 

 
 

Table of Contents 

1.Introduction ............................................................................................................................. 3 

2.Features ................................................................................................................................... 3 

3.Package Contents ..................................................................................................................... 3 

4.Specifications............................................................................................................................ 4 

5. Panel Functions ........................................................................................................................ 4 

5.1 Front Panel ....................................................................................................................... 4 

5.2 Rear panel ........................................................................................................................ 6 

6. Remote Control ........................................................................................................................ 7 

7. IR Control system(IR Call-back of Matrix and Source Devices) .................................................. 7 

8. HDBT Receiver ......................................................................................................................... 9 

9. Operate and Connect ............................................................................................................. 13 

 

 

 
 
 
 
 
 
 

 

 

 

 

Содержание HDM-944H70














Отзывы: