4
XTN
D 4K100TPC
HD CONNECTIVITY LTD, trading as HDANYWHERE registered in England and Wales. Company No: 06046737 Registered office: Unit 23 Link Business Centre, Link Way, Malvern, Worcestershire, WR14 1UQ. Contact: [email protected] Tel: 00441684575324
SETTING UP IR CONTROL
The XTND4K100TPC supports both backwards and forwards
IR. This allows IR signals to be passed through the installed CAT
cable either to the source device or the display.
SOURCE CONTROL VIA IR (BACKWARDS IR)
1. Plug IR Transmitter TX into the 3.5mm jack port labelled IR
OUT on the XTND 4K (100m) Transmitter
2. Place IR Transmitter TX bud (small circular part) in front of the
IR eye of the source (where you would normally point the remote
to control the HDMI source device)
3. Plug IR Receiver RX into the 3.5mm jack port labelled IR IN on
the XTND 4K (100m) Receiver
4. Place IR Receiver at or near the display (position it close to
where you would usually point your remote to turn your TV on
or off)
DISPLAY CONTROL VIA IR (FORWARDS IR)
1. Plug IR Transmitter TX into the 3.5mm jack port labelled IR TX
on the XTND 4K (100m) Receiver
2. Place IR Transmitter TX in front of the IR eye of the display
(position it where you would usually point your remote to turn on
or off your TV)
3. Plug IR Receiver RX into the 3.5mm jack port labelled IR RX on
the XTND 4K (100m) Transmitter
4. Place IR Receiver in a visible uncovered position where it is
able to receive remote signals
DC24V
Speaker Cable
HDMI Cable
Optical Cable
IR Cable
Cat Cable
