MANUFACTURER: Hantverksdesign & Rehabiliteringsprodukter AB
Tryffelslingan 4, SE-181 57 Lidingö, Sweden
tel. +46 8 767 04 80
fax. +46 8 767 50 00
www.hdrehab.se [email protected]
1 x
1 x
3 x
2
4
1
A
5
6
5
6
Parts included:
Assembling
Overview:
- The pommel comes in two sizes and two
versions: Standard version (diagram 1) and
front positioned version (diagram 2).
- The pommel consists of a pommel
cushion with a bracket (6) and a pommel
fastening (1).
- To use the pommel, the fastening must
first be fitted onto the seat plate of the
wheelchair.
Assembly, fastening:
(Diagram 3)
(You will need an Allen key.)
Fit the fastening (1) onto the front, top
edge of the seat plate (A), using the screws
(2). The seat plate comes adapted for use
with the fastening and includes three nuts.
Tighten the screws securely.
Instructions for use:
Push the pommel down into the fastening,
as shown in diagram 1 alt. 2. The position
can be locked by tightening the knob (4).
The depth of the pommel can be adjusted
by opening the underside of the cover; se
diagram 4 alt. 5. This enables you to loosen
the screw (5) slightly and set the bracket (6)
in the desired position.
Diagram 1.
Standard pommel.
Diagram 3.
Fastening of the mount
.
Diagram 4.
Standard pommel.
Diagram 5.
Front positioned
pommel.
Diagram 2.
Front
positioned pommel.
Rev. B
User manual /
Assembly instructions
Pommel, HD Balance
Art.no. 95809-1
Art. no.:
69620 (mount), 69605-2, 69606-2, 69615-2, 69616-2
Latest revision: 2011-09-27
Page 1 (1)
