HD Radio SANGEAN HDR-15, Руководство по эксплуатации

Страница: 9 / 38

GB GB
EE
08
Receiving HD Radio stations
Receiving Multicast Stations
HD SEEK function
HD Radio (APS) Auto Preset System
When the radio is tuned to an HD Radio station, the HD Radio logo will flash in the display, indicating
that the signal is blending from analog to digital. Once the receiver acquires the HD Radio signal, the
HD Radio logo will remain solid on the screen.
Press the Band button to select your required frequency band.
Press and hold the APS button to initiate scan. The radio will scan from the lowest frequency on the
selected band, automatically storing stations in preset memory based on signal strength order.
During the scanning process, as new stations are detected the station counter on the right hand
side of the display will increase.
1.
2.
When the radio is tuned to an HD Radio station, it will determine that one or more Multicast stations
are available and “HD1+”, for example, may appear on the display. “HD1” indicates the number of the
current multicast program and plus (+) means that additional HD Radio programs are available. Press
the Tuning up / down button on the radio to tune to HD2 / HD3 Multicast channel.
Using the HD Seek button, the radio will seek to the next available HD Radio station. This function will
also scan to the Multicast program if available.
Pressing and releasing the HD Seek button will tune to the next available HD Radio station of sufficient
signal strength.
This system will automatically scan and preset the received stations in the order of signal strength,.i.e.
the best reception station will be preset at Preset 1 and so on. APS function is only available in the HD
Radio FM / AM bands.
The maximum number of presets is 20 each for HD Radio FM and AM band. If during APS operation
more than 20 (HD Radio FM or AM) are found only 20 strongest stations will be stored in the preset
memories.
All previously stored preset stations will be erased when APS operation commences and HD
Stations are found.
To recall the preset station, press the Preset button and then press Tuning up / down button to select
the required preset number. Press the Select button to recall the memory station.
1.
2.
3.
NOTE