HD Radio HDS100, Руководство пользователя

Страница: 20 / 28

20
English
Change WiFi Frequency
Ch 1
Ch 2 5.19 GHz(WiFi Ch38)
5.23 GHz(WiFi Ch46) WiFi Ch1 (Green)
WiFi Ch2 (Yellow)
WiFi Channel Frequency Use Remote Control Button
1)
2)
- Digital compressed audio: AC-3 Dolby Digital, DTS ( Pass Through)
Digital Audio
- 16bit 2-channel linear PCM (44.1kHz & 48kHz)
Analog audio
1)
2)
3)
If there are the devices that use same WiFi frequency, the receiver’s output video may be
distorted because of frequency interference. In this case, you can change WiFi frequency in
order to avoid interference.
If you press the button (WiFi Ch1 / WiFi Ch2) of the remote control over 5 seconds, WiFi
frequency will be changed and system will be rebooted.
on the one device. However, if the transmitter and the receiver are not linked, WiFi frequency
should be changed on each of transmitter and receiver respectively.
■
Factory Reset
1)
2)
With pressing the power button of the transmitter or the receiver, connect the power.
Once you press the power button for 3 seconds, all the LED will blink and the system setting is set
to be factory mode.
■
■
Audio Format Supported
This Function is applied to only wireless model(w). Note1.