4
Install The Equipment:
When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without
any deformation. When installing the unit must be secured with a secondary safety attachment, e.g. and
appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculating working load limits, installation
material being used, and perodic safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.
The installation should be checked by a skilled person once a year.
The Inno Pocket Spot Pearl is fully operational in two different mounting positions, hanging upside-down
from a ceiling or set on a flat level surface. To avoid internal damage to the unit, never mount the unit on its
side as illustrated above. Be sure this fixture is kept at least 0.5m away from any flammable materials
(decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental
damage and/or injury in the event the clamp fails (see next page).
NOTICE:
The suitable enviromental temperature for this lighting fixture is between -25˚ C to 45˚ C. Do not place
this lighting fixture in an enviroment where the temperatures are under or above the temperatures stated above.
This will allow the fixture to run at its best and help prolong the fixture life.
