HCT HLD-320TB, Руководство пользователя, Страница: 16 / 72

Connections
16
- To avoid picture noise (interface), leaves an adequate distance between the TV and the VCR.
VCR Connection
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
DIGITAL AUDIO
OUT(COAXIAL)
ANT IN
ANT OUT S-VIDEO
IN
OUT
(R) AUDIO (L) VIDEO
1. Connect the Antenna Out socket on the VCR to
the Antenna Input socket on the TV.
2. Press the POWER button on the VCR and select
the appropriate input selection on the TV using
the remote control or the side buttons on the TV.
A A
When connecting with an antenna
VIDEO 1
S-VIDEO
Y Pb Pr
VIDEO 2
Y Pb Pr
VIDEO
AV IN AV IN
AUDIO
COMPONENT IN
AUDIO1
L
R
AUDIO2
L
R
L
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(L) AUDIO (R) VIDEO
OUTPUT
SWITCH
1. Connect the composite jacks between AV Input
on the TV and AV Output on the VCR. Make sure
the jack colors match with the connector colors on
both ends. (Video = yellow, Left Audio = white,
and Right Audio = red)
2. Insert a video tape into the VCR and press PLAY.
3. Select the AV input source on the TV using either
the SOURCE buttons on the remote control.
4. Refer to the VCR manual for operating instruc-
tions.
A A
When connecting with a RCA cable
VCR
Back panel of the set
VCR
Back panel of the set