HCO UM562 Wireless Camera
SETUP INSTRUCTIONS
CAMERA SETUP
1. Load the fully charged AA batteries. 12 (recommended), 8 or 4 (emergency);
2. Insert the SD card (16GB or smaller) and SIM card. Be sure that the PIN of the SIM card is disabled. (You can
disable the PIN of a SIM card via your service provider.);
3. Slide the power switch to the SETUP position to set up the camera. (Note: When going into the setup mode,
allow approximately 10-20 seconds for the camera to acquire a signal. You will know it has acquired a signal
when six numbers appear at the top right of the view screen.)
4. Press the “MENU” button to enter into the program menu, then press the UP or DOWN arrow buttons to
change the parameter settings as described in the user’s manual. Press the OK button to save parameter
settings. Press the RIGHT and LEFT arrows to change tabs.
5. Place the camera at the target area and turn on the camera
（
slide the power switch to ON
）
, the camera will
take pictures or videos as preset in step 4.
6. Press the
►
button to manually capture photos or record a video.
7. Press the OK button to playback the pictures. Use the UP or DOWN arrow buttons to scroll through pictures on
the color monitor.
8. To delete an image in SETUP mode, press the OK button to show the image, then press DELETE to delete a
image.
GSM SETUP
1. Insert a SD card and a SIM card into the camera.
2. Switch the camera to SETUP position, and press MENU.
3. Go to the MENU
GSM
Download Tool.
4. Press OK to download the GSMSETUP.ZIP into the SD card.
5. Remove the SD card from the camera and put in the computer.
6. A window will open with a file labeled GSM SETUP.exe in it.
7. Right click on the file and click on Extract Here(uncompressing software is needed on your computer).
8. A window will open with the GSM SETUP.
9. Explanations on the GSM SETUP:
Send Mode
Instant
•
If the camera takes a picture, the camera will send the picture instantly;
•
If a video is taken, the camera will send a SMS (text message). The SMS will tell the sequence
number of the video that was captured, instantly. Max Num: the maximum number of MMS (photos)
that you want sent within 24 hours.
Daily Report sends a SMS to tell how many pictures/videos were captured during the past 24 hours at the
pre-set time.
•
If in picture mode, the SMS tells the accumulated picture qty together with the latest captured
picture.
•
If in video mode, the SMS tells the accumulated picture qty only.
Off close the GSM function.
Send To
When you want to choose a different Send To mode, the lines marked with a red asterisk
“*”
must be
correctly filled in. The manufacturer has pre-set the parameters of some operators into the camera. The user
just needs to select one of the operators, and the camera will work and send MMS information according to
the preset phone number or email address. If the operator’s information is not included in the camera, the
customer must fill in the information. The customer must set the parameters for the URL, APN, IP and Port
according to the settings the service provider makes available. Please contact the network service provider if
you are not familiar with the settings.
Phone via MMS—sends MMS to the user’s Phone. Be sure to key in at least one phone number if Phone
via MMS is chosen.
