You should have:
ADAMM-RSM
Adhesive Pack
Charging Cradle
USB Wall Adapter
Turning ON and Turning OFF ADAMM-RSM
1. Turning
ON
: Press and hold
2
for 4 seconds and then release.
5
blinks blue and then
green as it powers UP.
2. Turning
OFF
: Press and hold
2
until the device vibrates (approximately 10 seconds) and
release as soon as the device starts to vibrate. If
5
lights up during this time, stop and
repeat in one minute.
3. Reset If
Not
Turning
ON
: Press and hold
2
for 20 seconds. If
5
lights up during this
time, stop the reset, as the light means the device is now turning ON.
Tip: A vibration will occur when you press
1
if the device is ON.
Applying the Adhesives
Quick Reference for using ADAMM-RSM
1
1
2
2
6
7
4
4
5
5
7
6
3
3
‘ON’ Check
& Sync
Button
Power Button
Voice Journal (optional)
Indicator Light
Indicator Light
Charging Contacts
Indicator Light
1. Hold the clear liner and
peel the white liner away
from the adhesive pad.
2. Hold the clear liner and
match the adhesive shape
with the device.
3. Press the adhesive pad
onto the device as shown.
4. Peel the clear liner
off without lifting the
adhesive off the device.
