HCL M 50 Shimmer, Руководство пользователя

Страница: 20 / 57

User's Guide Knowing the Parts
cable for connection to a local network. The built-in connector allows convenient use without additional
adapters.
Air Vents
The air vents allow cool air to enter and warm air to exit the Notebook PC.
USB Ports (2.0/1.1)
The USB (Universal Serial Bus) ports are compatible with USB 2.0 or USB 1.1 devices such as keyboards,
pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec
(USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single
computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of
devices so that most peripherals can be connected or disconnected without restarting the computer.
Express Card Slot
One Express card Slot is available to support one Express Card 54/34mm. This new interface is faster by
using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC
card slot. (Not compatible with previous PCMCIA cards.)
Flash Memory Card Reader
This Notebook PC has a built-in high-speed memory card reader that can conveniently read from and write
to many flash memory cards used in devices such as digital cameras, MP3 players, mobile phones, and
PDAs.
Important :
Make sure that Paper, books, clothing, cables or other objects do not block any of the air vents or else overheating may
occur.
2-7
4
5
6
7