hc-cargo 161101, Инструкция по эксплуатации

Страница: 2 / 52

161101, 161102, 161103, 161104, 161105, 161106, 161107, 161108,
161109, 161110, 161111, 161112
2
Vedpak 211_Version 1_03.2016
GB
Vedpak til 161101, 161102, 161103, 161104, 161105, 161106, 161107, 161108, 161109, 161110, 161111, 161112.
PURE SINEWAVE
DC TO AC POWER INVERTER 700W-USB/1000W/1500W
DC12V or 24V to AC220V~240V Instruction Manual
Please read user manual before use.
USEFUL APPLICATIONS: COMPUTERS, RADIOS, TVS, LAMPS, FANS… ETC.
SPECIFICATION
HC-CARGO no. 161101 161102 161105 161106 161109 161110
HC-CARGO no. (UK
version)
161103 161104 161107 161108 161111 161112
Continue output power 700W 1000W 1500W
Input voltage range DC 10~15V
(12V)
DC 20~30V
(24V)
DC 10~15V
(12V)
DC 20~30V
(24V)
DC 10~15V
(12V)
DC 20~30V
(24V)
Input full load current 70A (12V) 35A (24V) 110A (12V) 55A (24V) 160A (12V) 80A (24V)
Standby input current <0.9A (12V) <0.6A (24V) <1.3A (12V) <1A (24V) <1.3A (12V) <1A (24V)
Output voltage (AC) 220V~240V
Output waveform Pure sinewave
Output frequency 50Hz or 60Hz
Peak output power 1400W 2000W 3000W
Efficiency >85%
Battery low alarm 10.5 ± 0.5V
(12V)
21 ± 1V (24V) 10.5 ± 0.5V
(12V)
21 ± 1V
(24V)
10.5 ± 0.5V
(12V)
21 ± 1V
(24V)
Battery low shutdown 10 ± 0.5V
(12V)
20 ± 1V (24V) 10 ± 0.5V
(12V)
20 ± 1V
(24V)
10 ± 0.5V
(12V)
20 ± 1V
(24V)
Thermal protect 60 ± 5 ℃ (Micro controller)
Overload protect Yes (Micro controller)
Output short protect Yes (Micro controller)
Battery ex. 12V / 24V
protect
Yes (Micro controller)
Battery polarity protect Yes (by fuse)
Fan cooling Control by temperature
EuP mode input current <0.1A (12V) <0.1A (24V) <0.15A
(12V)
<0.15A
(24V)
<0.15A (12V) <0.15A (24V)
EuP mode AC output Detecting AC output every 4~6 second
USB port Output 5VDC (2.1A MAX.) N/A
Fuse 30Ax3pcs
(12V)
15Ax3pcs
(24V)
25Ax6pcs
(12V)
15Ax6pcs
(24V)
25Ax8pcs
(12V)
15Ax8pcs
(24V)
Dimension ( L x W x H)
mm :
340x135x79 360x195x80 430x245x85
Weight 2.1 kg 4.1 kg 5.2 kg
Troubleshooting
If the inverter does not appear to be functioning properly, there are several reasons why the inverter may not be responding.
1) Poor contact.
a) Clean contact parts thoroughly.
2) Inverter has no power.
a) Check fuse, replace damaged fuse.
b) Check inverter wiring. Repair if necessary.
3) Fuse is burned.
a) The fuse is located on the PCB board. Replace fuse with a fuse of equivalent value.
4) Overload caused AC output drop.
a) Reduce the wattage of your load to lower than 700/1000/1500 watts.
5) Thermal caused AC output drop.
a) Under heavy loads for extended periods of time. The AC inverter will reduce output to prevent damage from excess
heat. If this happens, please process as below:
i) Switch off the power to the inverter.
ii) Decrease load of this machine i.e. disconnect some of the appliances or wait until the inverter cools down.
iii) Switch on the power to the inverter.
6) Low-battery shutdown.
a) Recharge your battery and resume operation.