HBM Z6/M, Инструкции по сборке/монтажу, Страница: 11 / 64

Prior to mounting
Z6/M
A1063-6.0 HBM: public
9
4 Prior to mounting
S
Care should be taken to ensure that all surfaces for
siting and mounting are clean, smooth and level. De­
pending on the mounting conditions, any leveling error
can be compensated for by using suitable wedges
and compensation plates (permanently welded) or by
grinding away the mounting surface, for example.
Important
On no account must the module plates be ground.
S
The base or foundation frame must be sufficiently
rigid to prevent unacceptable deformation under load
(such as sagging).
S
In order to keep the mounting as free of constraining
forces as possible, the fastening holes on the founda­
tion frame and container joint must be suitably ali­
gned.
S
Every effort should be made to ensure uniform load­
ing on the support points. Care should be taken to
adjust the height on the support points correctly (com­
pensating shims need to be available). This is espe­
cially important in the case of statically undefined sup­
ports.