HBM ClipX, Руководство по эксплуатации

Страница: 69 / 248

Starting up the ClipX
ClipX
a4643-1.0 HBM: public
67
7.3 Setting the ClipX using a web browser
You make all the settings for sensors and signal processing in your browser.
You can view help on each topic by pressing F1 or clicking on . Click on
to make the SYS LED of the ClipX being used flash red/green if you have con-
nected multiple ClipX devices.
7.4 Ethernet API
The Ethernet API ( A pplication P rogramming I nterface) is a programming inter-
face by which you can send data via the Ethernet port to the ClipX. The data are
then displayed in the browser, and can be polled over the fieldbuses. You can
program an Ethernet API yourself for example.
7.5 Using parameter sets
You can store up to 10 parameter sets in the ClipX. A parameter set contains
almost all the settings of the various menus for
Amplifier (sensors), Calculated
Channels , Peak Values and Limit Switches etc. It does not include the net-
work settings, the settings for the fieldbus, the ClipX bus settings or settings for
synchronization of the CF amplifiers.
You can also transfer the parameter sets together with the other device settings
to your PC. Give the parameter sets names so that you can distinguish them
more easily. You can use up to 30 characters per name.
Click on to switch language.
After making the ClipX device settings in your browser, save them all to
your PC by choosing
Device Storage from the menu.