HBM Machines AD081-014, Быстрый старт

Страница: 4 / 5

The correct power tool will do the job better and
safer at the rate for which it was designed.
b) do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
if damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.
h) If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or it’s service
agent.
5) Service
a) have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
deScriPtiON ( Fig. A )
Your polisher is designed for polishing multiple
types of surfaces
1 On / off switch
2 Disc Polishing
3 Handle
SaFetY iNStructiONS
In this manual and/or on the machine the following
symbols are used:
Read the instructions
CE Conforms to the applicable European
safety standards
Class II machine – Double insulation
– You don’t need any earthed plug.
Denotes risk of personal injury, loss of life
or damage to the tool in case of
nonobservance of the instructions in this
manual.
Denotes risk of electric shock.
Wear ear and eye protection
Do not dispose of the product in
unsuitable containers.
additional safety instructions for polishers
• Turn on and off the tool only keeping the
polishing disc on the surface to be machined.
• Apply only light pressure on the tool.
• While dry polishing, always wear a dust mask.
• Do not eat, drink or smoke while using the tool.
• Use only a small amount of polishing paste.
Excessive amounts may cause slippage of the
pad from the polishing disc.
• Always follow the instructions on the polishing
paste for use provided by the manufacturer.
3