HBK Bruel & Kjaer 3670-A-082, Руководство пользователя

Страница: 21 / 36

13
Chapter 3
Set Up the Instrument’s
Audio Device
3.1 Set Up the USB Audio Driver
The audio driver’s BKSV USB Audio Control Panel provides the interface to set the parameters for
Type 3670. The four tabs are:
•
Status
• Buffer Settings
• Volume
• Info
3.1.1 Status
Fig.3.1
Status tab
On the Status tab, you can check connection with the
USB Audio Device
. If
BKSV USB Audio 2.0
is
displayed, you are connected to Type 3670 (BKSV USB Audio is the instrument’s firmware).
The
Current Sample Rate
is determined by the application software like the USB Audio Tool (see
section 3.2). You may find that some application software may only work with certain sample rates.