HBK BraggMETER SI, Быстрый старт

Страница: 8 / 20

FS22SI
INTERROGATOR SETUP
8
For the Rack-Mountable format connect the provided power cable to a 100-240 V power
line and to the interrogator’s power connector. Then, switch the safety power button to
ON.
Notice
Powering above the specified limits will damage the equipment. For the Rack-mountable
version there is a fuse protection that can be replaced. Please refer to the full user manual
for details.
The Power LED will acknowledge the power supply by turning green for 2 seconds
(
Fig. 2.3 ):
Power LED ON
2s
Fig. 2.3
Start the interrogator by pressing the “ON/OFF” button.
The Status LED will start blinking with the following order and meaning:
Status LED
Blinking 2 Hz
Status LED
Blinking 1 Hz
Status LED
On
Status LED
Blinking 2 Hz
Status LED
Blinking 1 Hz
Status LED
Blinking 5 Hz
(initialization issues)
Correct
Wrong
ON(0s) ~10s >30s <90s ?s
Status LED
Blinking 5 Hz
(measurement issues)
Fig. 2.4