HB-THERM M8110-EN, Инструкция по сборке

Страница: 3 / 4

Assembly Instructions M8110-EN
M8110-EN 2022-01
3/4
5. Proceed as follows in order to assemble new parts:

Assemble the new guide bush with the mounting rod and fix
with the Torx screw.
NOTICE!
Do not remove the mounting rod to re-assemble
the guide bush.
Fig. 1: Assembly of pistons

With T25931 clean piston and rod.

With T25930 use new piston.

Carefully push out the piston with the mounting rod and install
the piston (

Fig. 1).

Remove the mounting rod.

Assemble and fix the proportional modules (2.1).
ATTENTION!
Leakage when wrongly mounted!
The wrong mounting of the O-ring can destroy it
and result in leakage of the proportional module.
Therefore:
– Observe the correct assembly of the O-ring.

Engage the multiphase motor (M 4), turn into final position and
fix with the two hexagon head screws.
6. Reconnect mains plug and switch on main switch.