Hazro HZ30Wi e/f, Руководство пользователя

Страница: 4 / 20

Available Temperature & Humidity
Operating Temperature: 0 ~ 35°C
Storage Temperature: -10 ~ 50°C
Operating Humidity: 10 ~ 90 % RH
Storage Humidity: 40 ~ 70 % RH
For dot defect [dead pixel] of TFT
Hazro LCD monitors are manufactured using high-end semiconductor technology with
precision ratings of 99.9% and above. However, it may be the case that certain RGB and
white pixels seem darker (or entirely unlit i.e. black). Should such a situation occur, please
refer to the warranty section for further details.
PC system requirements
Adjust computer resolution and screen refresh rate in the control panel of computer as
described below to obtain the best picture quality. Hazro will frequently update literature and
sections of the website with a list of supported GPUs from ATI and nVIDIA.
Resolution : 2,560 x 1,600
Refresh rate: 60 Hz
The HZ30Wi requires a graphics card with a Dual-Link DVI output [DVI-D]. This term is not to
be confused with graphics cards that have two DVI connectors as it is possible that neither
outputs are Dual Link compatible. It is usual for twin DVI output graphics cards to have one
connector which is Dual Link [DVI-D] and the other to be single link [DVI].
NEVER USE A DUAL LINK MONITOR WITH A SINGLE LINK CABLE
Macintosh system requirements
Please ensure that any embedded graphics controller is Dual Link compatible and it can
support resolutions up to 2560x1600.
NOTE: Some resolutions e.g. 1920x1154 will not be interpolated and cannot be
mapped on Hazro monitors. Forcibly manipulating the monitor EDID values will void
all warranties.