12
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!
^
hazet.com •
]
2. Intended
use
Operational reliability is only guaranteed if the
device is used as intended in accordance
with the information provided in the operating
instructions. In addition to the safety advice in
these operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection valid for this tool's application range
must be observed and respected.
Use and maintenance of the tool must
always comply with relevant local and
national regulations.
• The HAZET twin turbo impact wrench is a
handy tool for handiwork and DIY jobs.
• It is particularly suitable for work on
motor vehicles, motorcycles, agricultural
equipment or assembly lines.
• Maximum efficiency due to the ground-
breaking HAZET Twin Turbo technology
enables high torques with compact design.
• Innovative 8-blade air motor with 25% higher
impact performance ensures maximum torque.
• Long service life and high efficiency in
industrial and automotive applications.
• Compact design, optimised for work in
confined spaces.
• Any deviation from the intended use and/or
any misapplication of the tools is not permit-
ted and will be considered as improper use.
• Any claims against the manufacturer and/
or its authorised agents because of dam-
age caused by improper use of the tools
are void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the operator.
1. Owner's
liability
• This tool was developed and manufactured
according to the technical norms and stand-
ards valid at the time and is considered to
be operationally reliable. Nevertheless, the
tool may present a danger when it is not
used as intended or used in an inappropri-
ate way by non-qualified personnel. Please
make sure that any person using this tool
or carrying out maintenance work carefully
reads and fully understands these operating
instructions before using the tool.
• Modifications of any kind or any additions
or modifications to the tool are prohibited.
• All safety instructions, warning and operation
notices on the tool must be kept legible at
all times. All damaged labels or stickers
must be replaced immediately.
• All specified installation values or setting
ranges must be observed.
• Keep the operating instructions together
with the tool at all times.
• The tool may only be used if it is in good
working order.
• All safety equipment must always be within
reach and should be checked regularly.
2
For your safety
