Hazet 4932-17, Руководство по эксплуатации

Страница: 14 / 20

14
2 For Your Safety
4. Storage
The tool has to be stored according to
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggres-
sive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: -10°C up to +40°C
• Relative air humidity: max. 60%
• Always store the device in unpressurized
state.
5. Dangers emanating
from the tool
Before each use, check the HAZET Tool for
full functional efficiency. Do not use the air tool
if its functional efficiency cannot be ensured or
if damage is detected. If the tool is used, when
it is not in full working order, you risk severe
injuries to persons and damage to property.
• Any service or repair work must be carried
out by qualified personnel only. In order
to guarantee long term operational safety,
only original spare parts of the manufacturer
must be used.
• Do not remove any safety devices and/or
housing parts.
• Do not operate the tool, if safety covers or
safety devices are missing or defective.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exclusion from warranty and liability.
• Keep children away from hydraulic tools.
Unattended tools could be used by
unauthorized persons and injure them or
other persons.
• Hydraulic tools must not get in contact with
live parts.
• Pay attention to the loading. The maximum
force must be equal to or below the author-
ized force. The devices/machines to be
operated must be able to bear the load.
• Overloading may cause the failure of the
hydraulic system and therefore cause personal
injury or damage to property.
• Only use spare parts, attachments and
accessories that are recommended by the
manufacturer.
•
Avoid unintended use.
• The tool must only be used if it is in good
working order
• While using the tool, make sure that the user
can always observe the hollow piston cylin-
der and the devices to be operated.
• Always keep the working area clean, well
ventilated and well lit.
• Do not use the tool under the influence of
alcohol or drugs.
• Any repair-work must be carried out by
authorized persons only.
• The tool labelling must always be kept leg-
ible. The owner and/ or user is responsible
that the sticker indicating maximum weight,
serial and article number is kept undamaged
and legible.
• Only use high-quality hydraulic oil for hollow
piston cylinders.
Never use inappropriate media. Dirty and/or
inappropriate medium may cause the failure of
the tool and therefore cause severe personal
injury or damage to property.
• Make sure that there is no unauthorized person-
nel and/or unnecessary devices in your working
area.