HAZET-WERK 161N-3D, Руководство по эксплуатации

Страница: 10 / 16

10 ^
hazet.com •
]
info@hazet.de
2. Intended use
Operational reliability is only guaranteed if
the device is used as intended in accordance
with the information provided in the operating
instructions. In addition to the safety advice
in these operating instructions, the general
safety regulations, accident prevention regula-
tions and environmental protection regulations
valid for this tool's application range must be
observed and respected. Use and mainte-
nance must always comply with relevant local
and national regulations. Please make sure
that any person using this tool or carrying out
any maintenance work carefully reads these
operating instructions and fully understands all
the provided information before using the tool.
• Any deviation from the intended use and/or any
misapplication of the tool is not permitted and
will be considered as improper use.
• Any claims against the manufacturer and/or its
authorised agents because of damage caused
by improper use of the tools are void.
• Any personal injury or material losses caused
by improper use of the tool are the sole
responsibility of the owner.
1. Owner's liability
• This device was developed and manufac-
tured according to the technical norms and
standards valid at the time and is considered
to be operationally reliable. Nevertheless,
the tool may present a danger when it is not
used as intended or used in an inappropri-
ate way by non-qualified personnel.
• Please make sure that any person using
this device or carrying out any maintenance
work carefully reads these operating instruc-
tions and fully understands all the provided
information before using the device.
• Modifications of any kind or any additions
or modifications to the tool are prohibited.
• All safety, warning and operating infor-
mation on the tool must be kept legible.
Immediately replace any damaged labels
or stickers.
• All specified installation values or setting
ranges must be observed.
• Keep the operating instructions together
with the tool at all times.
• The tool may only be used if it is in good
working order.
• All safety equipment must always be within
reach and should be checked regularly.
2
For your safety
Immer persönliche Schutzausrüstung tragen!
Always wear personal protective equipment!