HazeBase Hazer2 the Cube, Инструкция по эксплуатации

Страница: 11 / 19

Hazer ² – the cube
6.4 Operation via cable remote (option)
When operating via the cable
remote, the XLR input must
first be set to Remote (see
chapter Options).
After plugging in the cable
remote control, the Hazer²
automatically recognizes that
an analog cable remote control
has been plugged in. On the
cable remote control there is a
power switch and a potentiometer for setting the pump value. The fan speed must
still be set on the device.
6.5 Operation via radio remote (option)
When operating via radio
remote control, the XLR input
must first be set to Remote (see
chapter Options).
After plugging in the radio
remote control, the Hazer²
automatically recognizes that a
radio remote control has been
plugged in.
10