HazeBase classic 2, Инструкция по эксплуатации

Страница: 10 / 25

Classic² / Highpower²
6.1 Control panel of the Classic²/Highpower²
The Classic²/Highpower² is operated via the four keys (menu, minus, plus,
confirmation) and the OLED display. The menu fields are located in the corners of the
display, and the value field, which displays the value of the selected menu field, is
located in the center. The menu key is used to select the individual menus
counterclockwise. The corresponding value can then be changed with the help of the
plus and minus keys and then saved with the confirmation key.
On the left edge of the screen, "PWR" indicates whether the heating is active. On the
right edge of the screen, "OK" indicates that the machine is ready to fog.
6.2 Operation in stand-alone mode
The simplest case of control is the stand-alone mode. For this, the pump value is set
to the desired value and the confirmation key is pressed. If fogging readiness is
displayed, the fogging process starts immediately.
The pump value can also be changed during the fogging process.
Pressing the confirmation key again stops the fogging process.
9