background image

®

Your Hayward Pro Series high rate sand filter is a high perfor-

mance totally corrosion-proof filter that blends superior flow 

characteristics and features with ease of operation. It repre-

sents the very latest in high rate sand filter technology. It is 

virtually foolproof in design and operation and when 

installed, operated and maintained according to instruc-

tions, your filter with produce clear, sparkling water with 

only the least attention and care.

HOW IT WORKS

Your filter uses a special filter sand to remove dirt particles 

from pool water. Filter sand is loaded into the filter tank and 

functions as the permanent dirt removing media. The pool 

water which contains suspended dirt particles is pumped 

through your piping system and is automatically directed by 

the patented filter control valve to the top of the filter tank. 

As the pool water is pumped though the filter sand, dirt 

particles are trapped by the sand bed, and filtered out. The 

cleaned pool water is returned from the bottom of the filter 

tank, through the control valve and back to the pool through 

the piping system. This entire sequence is continuous and 

automatic and provides for total recirculation of pool water 

through your filter and piping system.

After a period of time the accumulated dirt in the filter 

causes a resistance to flow, and the flow diminishes. This 

means it is time to clean (backwash) your filter. With the 

control valve in the Backwash position, the water flow is 

automatically reversed though the filter so that it is directed 

to the bottom of the tank, up through the sand, flushing the 

previously trapped dirt and debris out of the waste line. 

Once the filter is backwashed (cleaned) of dirt, the control 

valve is manually re-sequenced to Rinse, and then Filter, to 

resume normal filtering.

INSTALLATION

If you own an above ground pool please see note: NSP1-4

Article V, for safe proper installation of the equipment 

package.

Only simple tools (screwdriver and wrenches), plus pipe 

sealant for plastic adapters, are required to install and/or 

service the filter.

The filter should be placed on a level concrete slab, very 

firm ground, or equivalent, as recommended by your 

pool dealer. Position the filter so that the piping connec-

tions, control valve and winter drain are convenient and 

accessible for operation, servicing and winterizing.

Assemble pump and pump mounting base, (if supplied) 

to the filter according to instructions packed with the 

base.

1.

2.

STRAIGHT ADAPTER

RETURN TO POOL

FROM

POOL

PUMP

ELBOW ADAPTER

VARI-FLO

CONTROL VALVE

SIGHT GLASS

FILTER

CLAMP

PUMP

MOUNTING

SCREW/WASHER

TYPICAL INSTALLATION

24 - 1/2” (63 cm)

WASTE LINE

38” (96 cm)    S-210T

38” (96 cm)    S-210TR

41” (104 cm)  S-220T

42” (106 cm)  S-244T

IS 210T HC 13

www.haywardpool.ca

Отзывы: