Hayward RC34 series, Руководство пользователя

Страница: 35 / 162

HAYWARD only warranties the quality, performance and safety of its products when assembled with genuine
Hayward manufactured parts. Use of non-genuine Hayward manufactured parts will void all warranty.
Page 14 of 20 Rev. C
IMPORTANT TIPS
● Do not drop or throw the cleaner into pool. Place cleaner away from the pool wall but do not throw the cleaner in the pool.
● Cleaning the filter cartridges after every use maximizes the unit’s performance.
● Replace worn brushes or foam rollers.
● To avoid clogging the cleaner’s filter elements, be sure all chemical powders are fully dissolved before operating the
cleaner.
● In a pool with high calcium content, more frequent cleaning of the filter cartridges is recommended.
● Save the original carton for extended storage or shipping requirements should your cleaner require service by a Hayward
Authorized Service Center.
● The sealed Motor Unit and the Power Supply contain no user-serviceable parts. Opening them will automatically VOID
your warranty.
● Remove items such as thermometer, toys and the like from the pool before operating the unit. Such items can jam the
cleaner and cause damage to the unit and/or your pool.
● The filter bucket is designed to be cleaned with the filters installed for normal clean up. For deep cleaning, the user can
remove each filter cartridge and clean separately.
● During the normal operating cycle of the cleaner, the handle side of the unit will rise from the pool bottom to allow the unit
to clear obstacles, such as elevated main drains and stair steps.
● For cleaners used in areas that have a lot of sand the cleaner may need to be rinsed with water at all flapper (filter debris
container’s flapper is at intake port) areas, and may need rinsing at the dome push button to allow free operation.