6
Use these steps to load a Configuration that has been downloaded from the web.
NOTE: Plug-in the USB drive prior to starting this process.
On the right of the dashboard locate and tap
the “config” icon.
Select the “restore config” option (fourth
down on the left most column).
Select where the file is stored, because this file
was loaded from the web onto a USB drive,
select “Restore from USB”.
Select downloaded file, if unchanged, it should
show as “MspConfiguration.xml”. Press the
check to finalize.
Step 4
Step 2
Step 3
Step 1
How To: Load a Config. Downloaded from Web
