8
How To: Train the AquaConnect Device
Use the following steps to train the
ACHN
to the control system. Make sure both
units are powered up when conducting this step.
Step 2
Step 3
Press the Menu button on the ProLogic
system until the Settings Menu appears,
then press the left arrow button until
“Teach Wireless: + to start” appears.
Press the “+” button to initiate the
sequence on the controller and hold
down the teach button on the Aqua
Connect Home Network device.
Training will be complete when the
controller reports “Teach Wireless
Successful” If unsuccessful, reposition
and repeat the training process.
Step 1
NOTE: If training the wireless device fails verify that the antenna is generation 2 (AQL2-BASE-RF). A
GLX-RF-EXTEND is available if the antenna needs to be moved closer to the Aqua Connect.
Содержание AquaConnect AQ-CO-HOMENET
Страница 1: ...AquaConnect Troubleshooting Guide Residential TSG ACHN110d Copyright 2017 Hayward Industries Inc ...
Страница 7: ...How To AquaConnect ...
Страница 25: ...Troubleshooting Guide AquaConnect ...
Страница 45: ...Additional Information AquaConnect ...