Hayward Aqua Trol AQ-TROL-HP, Руководство пользователя, Страница: 3 / 20

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
1
Introduction
The Aqua Trol
®
is an automatic chlorine generation system with a built-in filter pump timer de-
signed specifically for above ground pools. The operation requires a low concentration of salt
(sodium chloride) in the pool water at levels low enough that it normally will not be tasted. The Aqua
Trol automatically sanitizes your pool by converting the salt into free chlorine which kills bacteria
and algae in the pool through a process called electrolysis. Because chlorine will revert back to so-
dium chloride after killing the bacteria, these reactions will continuously recycle virtually eliminating
the need to add sanitizing chemicals to your pool. The only time you may need to add more salt to
the pool is when water is replenished due to backwashing, draining, or splashing (not evaporation).
The Aqua Trol incorporates a built in timer to control the pool filter. This timer insures that the
proper daily filtration and sanitization occurs. The Aqua Trol is designed to handle the purification
needs of the average residential above ground swimming pool of up to 18,000 gallons (67,500
liters). The actual amount of chlorination required to properly sanitize a pool varies depending upon
bather load, rainfall, temperature, and the pool’s cleanliness.
The Aqua Trol is available with several different options to allow for easy installation on a wide vari-
ety of above ground pools. The cell may be connected with 1½” - 1¼” flexible hose or to 2” rigid
PVC pipe when the -HP option is ordered, or the cell may be mounted directly to the pool return jet
when the -RJ version is ordered. Similarly, the electrical connections may be made via 120V/15A
“straight blade” linecord and receptacle (standard Aqua Trol version, no option designation) or may
be made via a 120V/20A “twist lock” linecord and receptacle when the -TL version is ordered.
AQ-TROL-HP “Straight blade” 120V/15A linecord/receptacle; 2” (51mm) rigid PVC piping or
1½ - 1¼” (38-32mm) flexible hose
AQ-TROL-HP-TL “Twist lock” 120/20A linecord/receptacle; 2” (51mm) rigid PVC piping or 1½ -
1¼” (38-32mm)flexible hose
AQ-TROL-RJ “Straight blade” 120V/15A linecord/receptacle; adapters for return jet mount-
ing
AQ-TROL-RJ-TL “Twist lock” 120V/20A linecord/receptacle; adapters for return jet mounting
NOTE: Before installing this product as part of a saline water purification system in an above-
ground pool with an immediately adjacent natural stone patio/decking, a qualified stone installation
specialist should be consulted regarding the appropriate type, installation, sealant (if any) and
maintenance of stone used around a saline pool with electronic chlorine generator in your particular
location and circumstances.
NOTE: The use of dry acid (sodium bisulfate) to adjust pool pH is discouraged especially in arid
regions where pool water is subject to excessive evaporation and is not commonly diluted with
fresh water. Dry acid can cause a buildup of by-products that can damage your chlorinator cell.