Hayter Harrier 48 BBC, Руководство пользователя

Страница: 6 / 20

7 6
6$)(7<35(&$87,216
Operation cont
If the machine has to be tilted for transportation when
crossing surfaces other than grass, and when transporting
the machine to and from the area to be mowed. Stop the
blade (s) by releasing the engine stop lever, ensure that
the blade (s) have stopped before tilting the mower.
Never operate the machine with defective guards, or with
RXWVDIHW\GHYLFHVIRUH[DPSOHGHÀHFWRUVDQGRUJUDVV
bag in place.
Do not change the engine governor settings or overspeed
the engine.
Start the engine carefully, with feet well away from the
cutterblade and always disengage the rear roller drive
clutch before starting the engine.
Do not tilt the mower when starting the engine.
Do not start the engine when standing in front of the
discharge chute.
Do not put hands or feet near or under rotating parts.
1HYHUSLFNXSFDUU\WKHPDFKLQHRUOLIWWKHUHDUGHÀHFWRU
while the engine is running.
1HYHUWRXFKWKHH[KDXVWH[KDXVWJXDUGRUFRROLQJ¿QV
when the engine is hot.
6WRSWKHHQJLQHDQGGLVFRQQHFWWKHVSDUNSOXJOHDG
-­ Before clearing blockages or unclogging the dis-­
charge chute.
%HIRUHFOHDQLQJFKHFNLQJRUZRUNLQJRQWKHPD -­
chine.
-­ After striking a foreign object. Inspect the machine
for damage and ensure necessary repairs are made
before re-­starting and operating.
-­ If the machine starts to vibrate abnormally (check
immediately).
6WRSWKHHQJLQH
-­ Whenever you leave the mower.
-­ Before refuelling.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the
equipment is in safe operating condition.
)UHTXHQWO\FKHFNIXHOOLQHVDQG¿WWLQJVIRUFUDFNVRU
leaks and replace if necessary.
Inspect the exhaust periodically and replace if worn or
leaking.
Never store the mower with petrol in the tank within an
HQFORVHGDUHDZKHUHIXPHVPD\UHDFKDQRSHQÀDPHRU
spark.
Allow the engine to cool before storing in any enclosure.
7RUHGXFHWKH¿UHKD]DUGNHHSWKHHQJLQHDQGWKH
surrounding deck area free of grass, leaves, or excessive
grease.
&KHFNWKHUHDUGHÀHFWRUDQGJUDVVEDJIUHTXHQWO\IRUZHDU
or deterioration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors and when the engine is cool.
Wear strong work gloves when removing and reassem-­
bling the cutterblade.
Control Symbols
Engine Stop
S T O P
Slow Fast
Variable Speed Control
Slow Fast
Height of Cut Adjustment Engine Start
(Code 491 only)