background image

1.6

INTRODUCTION

Thank you for purchasing a 

Hayter

mower.  The following pages are designed to help you gain

safe and efficient service from your machine.

IMPORTANT:

This ‘Owners Handbook’ should be regarded as part of the mower as it gives

essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your mower for the first time.  Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local 

Hayter

authorised dealer who will be pleased to give you assistance.

IMPORTANT: 

This mower is designed solely for use in a domestic grass cutting 

environment. Use in any other way is considered as contrary to the intended use. Compliance
with and strict adherence to the conditions of operation, service and repair as specified in this
handbook also constitute essential elements of the intended use.
This mower should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.

The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve Hayter Limited of 
liability for any resulting damage or injury.

Hayter

mowers are robustly constructed and designed for efficient economical 

performance under normal mowing conditions.  Correct operation and maintenance will ensure
a long and satisfactory service life.  Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.

Throughout this handbook all references to 

left

and 

right

are as viewed from behind the han-

dlebar, in the direction of forward travel.  

This handbook is based on information available at the time of publication.

HAYTER LIMITED

reserve the right to amend product specifications without prior notification.

Содержание 560D









































Отзывы: