Assembly
7
4
6
1
3
2
(17x146)
(25x3)
Figure 3
Mount the Grass Bag
1.
To lift the grass bag assembly, use the grass bag
handles (3) (see Figure 8).
3.
Mount the top of the grass bag assembly (12) onto
the rear plate hinges (13) (see Figure 9).
4.
When mounting the top of the grass bag (9), hold
the bottom of the grass bag slightly away from the
rear plate (14) (see Figure 8).
5.
Lower the grass bag (9) until the bottom is against
the rear plate (see Figure 10).
3
1
2
4
Figure 4
Assemble the Grass Bag
1.
Slide the top tube (1) onto the wire frame (2) (see
Figure 5). Make sure the handles (3) on the top
tube and the wire frame are on top.
2. Attach the struts (4) to the INSIDE of the mounting
tabs (5) with bolt (6) and nut (7). Make sure the
head of bolt is on the outside and nut is locked
against the strut.
3
7
6
1
5
4
2
6
6
5
(1x121)
(1x121)
Figure 5
3.
Slide the frame assembly (8) into the grass bag
(9) (see Figure 6). Make sure the Velcro flap (10) is
on top.
4.
Open the Velcro flap (10) (see Figure 7). Slide the
handle (3) through the opening and secure the Vel-
cro flap under the handle.
5. Attach the clips (11) to the frame assembly (8).
8
9
10
Figure 6
10
3
11
8
9
Figure 7
11
2.
Raise the rear bagger cover (16) away from the
rear plate.