STEP 2:
Repeat the above step to attach left arm assembly (FL) to back frame (B) and base (A).
STEP-BY-STEP ASSEMBLY:
NOTE : Do not tighten the bolts until all bolts have been installed. Once all bolts have been
installed, fully tighten all bolts installed in previous steps.
Insert barrel nuts (5) in right arm assembly as shown in Detail (A).
Attach the right arm assembly (FR) to back frame (B) with bolt (2) and spring washer (4). Use
Allen key (6) to install bolt (2).
Insert barrel nuts (5) right arm assembly as shown in Detail (B).
Attach right arm assembly (FR) to base (A) using bolts (3) and spring washers (4) as shown. Use
Allen key (6) to install bolts (3).
Dist
ributed
by:Jardine En
t
erp
rise
Lt
d.
P.O.
Box 83-66
Taipe
i
,Taiwan
NOT
E:
1.Use glue (
10) when ins
ert
ing wood dowel
s (5),
wipe
an
y excess gl
ue.
2.After
assembly is completed
, all
ow 8 ho
urs for glue t
o d
ry
before us
i
ng.
5/7
Bolts (3) must go through the
holes underneath base (A).
Bolt (2) must go through the
hole on the side of back rest (B).
DETAIL A
DETAIL B
NOTE-
Barrel nuts (5) must be inserted so that the bolts can pass through them. If barrel nuts
(5) are not inserted properly, use a Phillips head screwdriver (not included) to rotate them.
