12x10 & 12x12 eCONO Apex & Apex
PLUS
Stable
FITTING INSTRUCTIONS
YOU WILL NEED THE TOOLS BELOW TO INSTALL YOUR STABLE
6ft Level, hammer, tape measure, Posi-drive No.2 screwdriver, 13mm/15mm/17mm socket wrench or
spanners, handsaw, Masonry drill, 8mm Masonry drill bit, ladder.
HEALTH & SAFETY
If you have chosen to fit your shelter yourself - please be very careful during installation.
•
DO NOT INSTALL YOUR SHELTER DURING PERIODS OF HIGH WINDS.
•
MAKE SURE YOU WEAR YOUR PERSONAL PROTECTIVE EQUIPMENT (not supplied).
•
PLEASE ENSURE THAT WHEN USING A LADDER THAT IT HAS BEEN INSPECTED AND IS FREE FROM FAULTS.
•
ALWAYS HAVE SOMEONE WITH YOU TO ‘FOOT’ THE LADDER WHILE YOU CLIMB THE LADDER.
•
ENSURE THAT THE LADDER IS USED ON STABLE, HARD GROUND.
•
TAKE EXTRA CARE WHILE WORKING AT HEIGHT.