Hay Loop Stand Table Скачать руководство пользователя страница 3

>  

CARE AND MAINTENANCE

 <

LINOLEUM 

• Clean with a clean cloth wrung in water or in a solution 
of water and a neutral detergent or soap flakes. Remove 
soap residue immediately using a clean, dry cloth. 

• If the surface is scratched or appears matt, use a care 
product suited especially for linoleum.

• Stains may be carefully removed using white spirit 
(mineral spirit) or a damp nanosponge dipped in luke-
warm water or linoleum care. Follow up immediately with 
a clean, dry cloth. Never use the nanosponge dry. 

• Avoid alkaline detergents such as soft (yellow) soap, 
washing soda, lye and scouring powder. 

LAMINATE

• Clean with a clean cloth wrung in water or in a solution 
of water and a neutral detergent. Remove soap residue 
immediately using a clean, dry cloth. 

• Stains may be carefully removed using household 
ammonia or with a clean, damp cloth or a nanosponge 
wrung in warm water. Never use the nanosponge dry. 
Follow up immediately with a clean, dry cloth.

• Avoid using scouring cream or scouring pads, as they 
may scratch the surface. 

POWDER COATED STEEL

• Clean with a clean cloth wrung in water or in a solution 
of water and a neutral detergent. Remove soap residue 
immediately using a clean, dry cloth. 

• Avoid using scouring cream or scouring pads, as they 
may scratch the surface.

>  

CARE AND MAINTENANCE

 

<

CAUTION

With a little care you can prolong the life of your 
furniture. Follow the instructions for the materials of 
your specific product to make sure that it stays in the 
best shape for as long as possible. 

The information below is only intended as a 
general guideline. For more information on how to 
remove specific stains, please inquire where you 
bought the furniture.

• Always remove stains quickly before they can do any 
permanent damage to the furniture.

• Avoid placing the furniture in direct sunlight or near a 
strong heat source to reduce changes. 

• When you move the furniture, make sure to lift it rather 
than pulling or pushing it to avoid damaging the floor, 
legs and mountings. 

• Tighten up the screws after one to two months’ use 
and when required .
 
• Avoid improper use such as putting your feet on the 
table or standing on it.

• Use coasters under damp, hot or coloured objects to 
avoid permanent stains. 

• Be careful not to scratch or damage the surface with 
sharp objects.
 
• Avoid covering the surface partially, for example with 
tablecloths or place mats, as colour variances may 
appear. 

Содержание Loop Stand Table














Отзывы: