12/10
Model HCR8; HCR8.50
Page 2 of 6
NOTICE:
This water cooler must be connected to the water supply using a dielectric coupling.
IMPORTANT! INSTALLER PLEASE NOTE
The grounding of electrical equipment such as telephone, computers, etc., to water lines is a
common procedure. This grounding may be in the building, or may occur away from the
building. This grounding can cause electrical feedback into a water chiller, creating an
electrolysis which causes a metallic taste or an increase in the metal content of the water.
This condition is avoidable by using the proper materials indicated under Installation Section.
SAFETY PRECAUTIONS
A. Do not allow water to come into contact with live electrical wires because short-circuiting and
shocks can occur.
B.
WARNING
: Beware of rotating fans when covers are removed.
C. Care should be taken not to puncture refrigeration system lines. Some lines contain gas
under high pressure.
D. Install cooler to conform to all applicable codes, including the National
Electrical
Code.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT:
1-800-766-5612
FOR CUSTOMER SERVICE:
1-888-640-4297
NOTE TO INSTALLER
: Please leave this information with the Maintenance Department.
Haws electric water cooler’s are not designed or recommended for outdoor or corrosive
environments such as enclosed chlorinated pool areas.
Consideration must be made at the time of installation to adhere to state and/or local codes and
environmental/atmospheric conditions such as, but not limited to, dust, corrosion, freezing etc.
These conditions will void the warranty.
CAUTION!
Prior to making any electrical connections, verify with a voltmeter that power from the
service panel is
off.