10/17
Model 7656WCC
Page 3 of 5
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1. No flow.
1.
Check the main shut-off valve.
2. Insufficient water flow at eye/face
wash.
2. a. Verify minimum 30 psi flowing supply line
pressure.
b. Probable clogging of flow control due to
inadequate line flushing. Unscrew
eye/face wash head and remove the four
screws to disassemble head. Clean flow
control and reassemble head.
c.
Remove cap located on in-line strainer
housing using a ¼” Allen wrench to
access and clean filter screen. See
installation drawing for location.
3. Eye/face wash streams do not meet
desired eye level.
3. a. Possible blocked flow control, see above
solution.
b. Possible non-leveled eye/face wash
assembly.
4. Tray too hard to open or does not
stay closed.
4.
See “Installation Procedure” Step 2.
For more information about Haws products, see our website:
© 2017 Haws
®
Corporation – All Rights Reserved
HAWS
®
and other trademarks used
in these materials are the exclusive property of Haws Corporation.
