•
HAWS AG
•
Bachweg 3
•
CH-3401 Burgdorf
•
Switzerland
•
www.haws.ch
HAWS Corporation
•
P.O.Box 2070
•
1455 Kleppe Lane
•
Sparks,Nevada 89431/USA www.hawsco.com
HAWS DRINKING FAUCET COMPANY
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
Check the main shutoff valve.
Problem
Check the line pressure. This should be at least 2BAR /
1.
30PSI (dynamic).
Blocked flow, possibly due to the conduit not being
2.
correctly flushed out. Dismantle the spray element, and
clean the rubber flow-regulator.
TROUBLESHOOTING
Repair-checklist
1. No flow
2. Insufficient flow of water
2080192/1
8901RFK Axion
Jeannine Ruf
28.10.2011
2/5
No.
Model
8901RFK Axion
Eye/Face Wash & Body Spray
Shower location:
The eye/facewash & body spray 8901RFK Axion must be installed in the vicinity
of potential danger zones. It must be highly visible and easily accessible.
Connection conduit:
You are recommended to use a 1/2" G conduit, capable of withstanding
pressures of 2 - 6BAR (30 - 90PSI). The use of an inlet filter designed to prevent the entry of
suspended particles and other impurities is also recommended.
Water quality:
Eye/facewash & body spray require a supply of drinking water conforming to European
standards or their equivalents in other countries.
Water temperature:
The required water temperature should be determined by the user. The accepted
ideal range is 15 - 35°C / 60 - 95°F (but please ensure conformity with local regulations).
Volum flow:
A minimum flow rate of 6 litres / 1,6 US gallons per minute must be maintained. The
eye/facewash & body spray must be capable of delivering this amount of water for at least 15 minutes.
Connection to plumbing system:
The inlet consists of a 1 1/4" G male-threaded conduit.
Regular inspection:
The eye/facewsh & body spray 8901RFK Axion should be inspected at weekly intervals.
The inspection tag should be dated and signed after each check.