16
CARE AND CLEANING
Warning!
Before carrying out any checks or maintenance operations, disconnect the plug from the
electric power supply.
Check your machine regularly before starting the work. Make sure that all nuts, bolts and screws are
tight and that the guards are fitted correctly.
All damaged and worn parts should be replaced in order to maintain the Vacuum-Blower in a safe
working condition.
Never leave material in the Vacuum-Blower or the debris collection bag. This could be dangerous
when starting the Vacuum-Blower.
After use the Vacuum-Blower should be thoroughly cleaned.
Ensure that the Vacuum-Blower is switched off and disconnected from the mains supply. Remove
and empty the debris collection bag. Ensure that the Vacuum / Blow selector lever operates smoothly
and that it is not obstructed by debris. Brush any loose debris from around the fan and inside the
suction/blower tube.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water. Clean the motor housing only with a moist cloth and
never use detergents or solvents! These could ruin the plastic parts of the machine. Finally, dry the
motor housing carefully.
Store the appliance in a dry place, out reach of children.
if the replacement of the supply cord is necessary, this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
WARNING: FOR YOUR OWN SAFETY THIS BLOWER&VAC. IS DOUBLE INSULATED, TO AVOID
ELECTRICAL SHOCK, FIRE, OR INJURY, USE ONLY PARTS IDENTICAL TO THOSE
IN THE PARTS LIST. REASSEMBLE EXACTLY AS THE ORIGINAL ASSEMBLY TO
AVOID ELECTRICAL SHOCK.
