Configuration Program -
The Wireless Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Mac Installation
•
Mac OSX users may also follow these instructions for setup. (IE browser recom-
mended)
Preparation
Before attempting to configure the Wireless Router, please ensure that:
•
Your PC can establish a physical connection to the Wireless Router. The PC and
the Wireless Router must be directly connected (using the Hub ports on the Wire-
less Router) or on the same LAN segment.
•
The Wireless Router must be installed and powered ON.
•
If the Wireless Router's default IP Address (192.168.1.254) is already used by
another device, the other device must be turned OFF until the Wireless Router is al-
located a new IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the Wireless Router will appear in
the system tray, notifying you that a new network device has been found, and offering to
create a new desktop shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of the Wireless Router, you can accept
the desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices
in
My Network Places
(previously called
Network Neighborhood
).
•
Double - click the icon for the Wireless Router (either on the Desktop, or in
My
Network Places
) to start the configuration. Refer to the following section
Setup Wiz-
ard
for details of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the Wireless Router:
1. After installing the Wireless Router in your LAN, start your PC. If your PC is already
running, restart it.
2. Start your WEB browser.
3. In the
Address
box, enter "HTTP://" and the IP Address of the Wireless Router, as
in this example, which uses the Wireless Router's default IP Address:
HTTP://192.168.1.254
Because the default password is blank, you will not be prompted for a password. How-
ever, you should assign a password. See the
Password Setup
section later in this
chapter for details.
Содержание Wireless-G Router
Страница 1: ......
Страница 6: ...If any of the above items are damaged or missing please contact your dealer immedi ately...
Страница 42: ......
