www.hawkingtech.com
Technical Support
Tel: 1.888.202.3344
E-mail: [email protected]
© 2017 Hawking Technologies, Inc. All rights reserved. All trademarks herin are the property of their respective owners. Apple, Mac, iPad, and iPhone are registered trademarks of Apple Computer, Inc. No Affiliation implied or expressed.
HW17ACM- QIG 2016.11.16
4
Quick Setup
a.
To change the SSID of your access point’s 2.4GHz wireless network, go to
‘2.4GHz Basic Settings’. Enter the new SSID for your 2.4GHz wireless network
in the “SSID1” field”. The default 2.4GHz SSID is
‘
Hawking_HW17ACM_2.4GHz
’.
b.
Go to ‘5GHz Basic Settings’ and repeat step 1 for the access point’s 5GHz AC
wireless network. The default 5GHz SSID is ‘
Hawking_HW17ACM_5GHz
’
c.
To change the access point’s LAN IP address, go to ‘LAN-side IP Address’.
Enter the IP address settings you wish to use for your access point. You can
use a dynamic (DHCP) or static IP address, depending on your network
environment. Click ‘Next’ to save the changes and to go to the security
settings.
d. To configure the security of your access point’s wireless network, go to
‘2.4GHz Wireless Security Settings/5GHz Wireless Security Settings’. Select
an ‘Authentication Method’ and enter a ‘Pre-shared Key’ or ‘Encryption Key’
depending on your choice, then click ‘Apply’. Hawking recommends at least
WPA/WPA2 security.
Click ‘Apply’ and the device will now reset and save your settings. The basic settings of your access point are now configured!
5
Hardware Installation
Connect a router or PoE switch to the access
point’s LAN port using an Ethernet cable. If
you are using a router/standard network
switch, connect the power adapter to the
access point’s 12V DC port and plug the power
adapter into a power supply.
If you are using a PoE switch, do not use the power
adapter as your PoE switch will provide power.
The HW17ACM supports wall mounting. Refer to
the manual located on the CD for installation
instructions.
6
Enjoy your Hawking HW17ACM Wireless Network!
For more information on the different settings, refer to the full manual located on the CD. You can also download it from www.hawkingtech.com.
Have questions? Feel free to contact our 24 hour Technical Support Line at 1.888.202.3344 or email us at [email protected]
