- 37 -
For example, when you enter
192.168.0.50/192.168.0.80
in
Start/End IP Address
of
Accept
> IPv4
, the user whose IP
address located within
192.168.0.50 ~ 192.168.0.80
will be allowed
to access the camera. On the other hand, if you enter the IP range
in
Start/End IP Address
of
Deny
> IPv4
, the user whose IP
address located within the range will not be allowed to access the
camera.
4.4.4 Network >> Wireless Setting (for wireless
model)
The camera supports WLAN while you use the wireless network.
Select the
Enable
option to enable this feature.
Wireless
-
Network ID (SSID):
Keep the default setting of this option
to connect the camera to any access point under the
infrastructure network mode. To connect the camera to a
specified access point, set a SSID for the camera to
correspond with the access point’s ESS-ID. To connect the
camera to an Ad-Hoc wireless workgroup, set the same
wireless channel and SSID to match with the computer’s
configuration.
