Pre-installation:
Note: The default setting for the
HKS102 Mini 2-port KVM Switch
works with
most systems. In fact, you do not have configure anything before installation. It
is a plug and play device: Just connect the keyboard, the monitor, and the
mouse to the KVM Switch. Then, connect the KVM cables to connectors on
your computers. Finally, boot up the computer one at a time and you can start
switching between the two computers.
For a quick start on installation and operation, please follow the instructions
below.
The correct setup sequence is ……
1. Connect the shared keyboard, monitor, and mouse to the KVM Switch first,
and then connect one set of built-in cable to the computers.
2. Power up your connected computer …
Since the KVM Switch receives power from the computer’s PS/2 interface,
it is powered up when you connect the KVM cables to a PC.
