w w w . h a w k e y e e l e c t r o n i c s . c o m
Depth Readout
The depth readout on the upper left corner will appear
after the power is turned ON and the sonar sensor is
placed in water between 1.5 feet and 99.9 feet (.5 to
30.4 Meters). If the depth exceeds these parameters,
the depth meter will indicate “---”. This reading may
also occur in water that is extremely dirty, or where
there are heavy silt or mud bottoms. Sonar is a sound
signal that travels through water. Sonar will not travel
through air. Keep this in mind when using the fish
finder, as the smallest air bubble between the sonar
sensor and the water will cause the unit to not operate
correctly.
Fish Indicators
If the fish finder determines that sonar has detected a
fish, the display will show a fish shaped icon. The first
column of fish indicators on the right of the display
shows the most current information. This column is
then moved to the left as a new reading is displayed.
That is, fish indicators “swim” away from the right to
the left at a constant speed. This motion in no way
reflects actual movement of the fish.
Fish Depth Indicator
Use the Fish Depth Indicator to measure the fish’s
depth from the Sonar Sensor. This can be done by
dividing the depth reading by 10. This number
represents the value of each box.
(Example: The depth is 70.0 feet, the fish symbol appears in the 5th box from the
top. This means the fish is 35 feet from the surface)
TARGETING PREY IN THE WEEDS
The WeedID
®
feature incorporated into the fish finder depicts the amount of weed
at the bottom of the water body.
N
OTICE
:
In an area where tall and
short weeds are present,
all 3 icons will be lit.
