9
10
focusing
•
Remove the objective lens cover and look through
the eyecup at the screen.
•
Adjust the dioptre focus ring until the icons on the
screen are sharp.
•
Adjust the objective focus wheel until the desired
viewing image is sharp.
•
The infrared illuminator should be used to achieve
the optimum viewing image.
•
If the environment is light enough, the infrared
illuminator can be turned off to save power.
•
Be careful not to block the infrared illuminator, as
this will affect the viewing image.
screen brightness
•
The brightness adjustment menu allows you to alter
the brightness of the digital display.
•
While in photo or video mode, press the “IR” button
to enter the brightness adjustment menu.
•
As shown on the image above, the number after the
word “Bright” is the current screen brightness.
•
Press the “down” button to reduce the brightness
and the “up” button to increase it. There are 9 levels
of brightness in total with 9 being the brightest.
•
To exit the brightness adjustment menu, press the
“IR” button twice.
Bright: 7
LAMP: 0
*
