7
Read Warning! Safety First
Press the
button twice within three seconds, Remote
engine icon will appear on LCD remote fob, LCD remote
fob will bleep for 3 times, engine will start automatically,
and used for non-key driving and warm-up. Repeat the above operation if
the engine does not function due to cold weather or due to slow rotation of
engine. Engine will stay on 10 minutes.
How to turn off the remote start function
: press the
button once
then engine will stop.
Warning! Safety first
When properly installed, this system can start the bike via a command signal
from the remote control transmitter.
Therefore, never operate the system in an enclosed area or partially enclosed
area without ventilation (such as a garage). It is the user’s sole responsibility to
properly handle and keep out of reach from children all remote control
transmitters to assure that the system does not unintentionally remote start the
bike.
THE USER MUST INSTALL A CARBON MONOXIDE
DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO
THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING
AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE
STORAGE AREA
MUST AT ALL TIMES REMAIN CLOSED
. These
precautions are the sole responsibility of the user.
Use of this product in a manner contrary to its intended mode of operation may
result in property damage, personal injury, or death. (1) Never remotely start
the bike with the bike in gear, and (2) Never remotely start the bike with the
keys in the ignition.
REMOTE START
