4
Install Your HAWK compact Motorcycle Alarm System
PLANNING THE INSTALLATION
LOCATION OF MAIN SYSTEM COMPONENTS
Before commencing with the installation, plan where to secure the main components. See the
location diagram for suggested locations for the main components of the system.
CONTROL UNIT
The control Unit should be located in a protected environment with good access to the motorcycle
wiring loom. Avoid extremes of heat i.e. exhaust engine and direct exposure to the elements, and
make sure that the unit does not interfere with normal operation of the motor cycle. The control
wiring must point down to avoid any water ingress.
LED ALARM INDICATOR
The desired location of the LED Alarm Indicator should be mounted in a prominent position;
suggested locations are the instrument cluster or a rear body panel with good viewing access.
• The Control Unit
• Pliers/Cable Cutters
• Two Remote Transmitters
• Motorcycle wiring diagram
• Installation Instruction
• Drill (9.5mm & 8mm bits)
• User Guide
• Soldering Equipment
• Siren
• Self Adhesive Heat sink Tubing
• Wiring Loom
• Good quality insulating tape
• Warranty Information
• Masking Tape
• Neck Strap & Alarm Warning Sticker
• General Workshop Tools - Multi-meter
The Box Contains
Tools Required
