Hawk HA-204, Руководство пользователя и инструкция по установке

Страница: 4 / 10

3
every second and the buzzer emits the confirmation sound
of
Bi…Bi…Bi…(see F
F
F F1
1
1 1 of programming table, by
factory default setting the sound to enter into anti-hijack
mode is turned off).
At the 30secs (see F4
F4 F4
F4 of the
programmable table, it can be also programmed as
K1/15secs),
Killer-1 will begin to block the electric
circuits, the buzzer releases a shorter sound of Bi.Bi.Bi.
and at the 60secs (see
F4 F4 F4 F4 of the programmable table, it
can be also programmed as K2/30secs), Killer-2 will
start to block the oil circuits, the buzzer gives no sound.
Both electric and oil circuits will be unblocked until the
transmitter is in valid range, the system will exit the
anti-carjacking mode with a confirmation sound of
Do..Re..Mi(1/2/3)(see
F2 F2 F2 F2 of programming table, by
factory default setting the sound to exit anti-hijack mode
is turned off).
Attention:
Attention:
Attention: Attention:
1. If the transmitter is in valid range, the system won’t
enter into anti-carjacking mode. When the transmitter is
out of valid range, it will enter into anti-carjacking mode
automatically.
2. There is power off memory for the system, if the
power circuit is cut off during the anti-carjacking mode
and after the power is resumed, the Killer-1 and Killer-2
will immediately begin to block the electric and oil
circuits.
Anti-carjacking Anti-carjacking Anti-carjacking Anti-carjacking Deactivation Deactivation Deactivation Deactivation
There are 3 ways to exit the anti-carjacking mode, when it
is deactivated, the LED will be turned off.