8. WINDOW CLOSE (optional accessory HA-64 required)
9. TRUNK RELEASE
(optional accessory RELAY required)
When system in arming mode, press button 2 for 3 sec, system will disarm and then
release trunk, when system in disarming mode, press button 2 for 3 sec, system will
release trunk directly.
10. PANIC
a. While arming, press button 1 & button 2 during arming or disarming, the
system will keep sounding for 2 minutes.
11. EMERGENCY OVERRIDE
Open door, turn IGNITION ON, then insert touch key to the receptacle and take it
out within 8 seconds, the system will disarm. LED will be OFF. (IMMOBILISATION
will be mobilised again at the same time)
12. FUNCTION SELECTION
While disarming, the system can choose:
J1: NOT USED
J2: SELF-CODING ACTIVATED / SELF-CODING ISOLATED
J3: ON J4: OFF
LOCK 6 seconds
UNLOCK 6 seconds
J3: OFF J4: ON
DUAL LOCK 0.5 seconds DUAL UNLOCK 0.5 second
J3: ON J4: ON
LOCK 40 seconds
UNLOCK 1 second
(After setting arming, if the user bypass the UL sensor, the
LOCK time will be actually 1 second. Then if press button
2 within 30 seconds to output WINDOWS 1, it will output
LOCK signal at the same time. But if the user doesn’t
bypass the UL sensor, the LOCK time will be 40 seconds.)
J3: OFF J4: OFF
LOCK 1 second
UNLOCK 1 second
13. ENABLE/DISABLE CHIRP SOUND
a. Disarm system
b. Open driver door
c. Within 8 seconds press button 1 and 2 at the same time
d. Then hazard light will flash once for disable or flashes twice for enable.
14. SELF-CODING
a. While disarming, turn IGNINTION ON
b. Switch DIP SW J2 to ON
c. Then LED will be ON
d. Press the transmitter you want to code
e. Then LED will be OFF. It means this transmitter has finished the coding.
f. Then LED will be ON again. It means you can code another transmitter now.
The system allows you to code 4 transmitters in total. (When the fifth
transmitter is coded, the code for the first transmitter will be cleaned)
g. And then switch DIP. 2 to OFF and switch to ON again
h. Insert the touch key you want to code
i. Then LED will be OFF. It means the touch key has finished the coding.
