Havso Bianca 3.0, Руководство пользователя

Страница: 16 / 20

English
16
OPERATION
and time. You can also reset the temperature and time by following the above
operation. Press once after reset and the corresponding indicator illuminates
solidly instead of flashing, and the appliance will work based on the reset
settings. If not pressing any keys for 3 seconds, the reset will be invalid.
– During operation, you can press and hold the key for about 2 seconds to
turn off the appliance and enter standby mode.
– If you do not want to set the temperature or time, you can press the key to
start the appliance according to the last saved settings.
7. Wait for the water to heat up to the set temperature. One long beep will be heard
when the set temperature is reached, and then the time starts to count down.
8. Add your food in the pot and let the appliance do its work. Three beeps can
be heard when the countdown is finished, and then the appliance enters into
standby mode.
Caution: The bottom part will become very hot during operation. Make sure it
has cooled down completely before touching it.
9. Unplug the appliance and clean it by following the instructions in the section
”Cleaning”.
Notes:
– If the appliance is unplugged, the display will show the default temperature and
time settings (“50:0” and “03:00”) after being turned on again.
– The appliance has memory function, which means that it will start according to
last set temperature and time when it is started again (only pressing the key) -
if it has only been in standby mode and not unplugged from the power source.